Virtual Serial Port Driver XP4 creates any number of pure virtual serial ports pairs in your system which are virtually connected to each other. You can transfer files, exchange data or do whatever you want as it was real serial ports. For example, you can create virtual pair COM5-COM6. In this case all data sent by other applications to virtual serial port COM5 arrives at virtual serial port COM6 and all data sent to COM6 arrives at COM-port 5.

• License: Shareware
• Language: English
• Release: 2003-09-10
• Size: 1 Mb
• Cost: 111.95 $

You can connect data collection serial devices: bar code scanners, modems, sensors, gages, RF equipment, telephone PBX systems, laboratory or industrial instruments, and so on - to the serial ports of your computer to deliver that data anywhere over any TCP/IP based network. Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well.

• License: Shareware
• Language: English
• Release: 2006-12-21
• Size: 1 Mb
• Cost: 199.95 $

HW VSP adds a virtual serial port (COM5) to the system and redirects all communication over TCP/IP to remote IP address. HW VSP is free in unlimited version, it supports Windows 2000 and XP. HW VSP works with any TCP/IP device, it can work as a TCP server as well as a TCP Client. HW VSP supports remote RS232 port control (speed, parity, stop bits, etc..) over the RFC2217 (NVT).

• License: Freeware
• Language: English
• Release: 2005-08-15
• Size: 1021 Kb
• Cost: Free

AVSD is appointed for emulation of one, two or more (up to 200) serial streams. Hardware devices are not necessary. This product is based on Windows XP DDK and doesn't require using devices of other manufacturers. The whole product is created with the help of Microsoft tooling.

• License: Commercial
• Language: English
• Release: 2004-05-14
• Size: 447 Kb
• Cost: 119.00 $

Multicom.Net gives you the possibility to give the remote access to serial port via TCP/IP. Now with Multicom.net you can: -Optimize network data flow between computer & data terminal. -Split serial output between different clients. -Provide additional control through serial stream.

• License: Commercial
• Language: English
• Release: 2004-04-02
• Size: 283 Kb
• Cost: 19.00 $

There is a number of the equipment controlled through a serial port from a PC or a terminal. Also there is a lot of the technologies in the market allowing to operate remotely the consecutive devices through the network TCP/IP. These solutions contain, both software and the hardware. Now with Multiport.USB you can: -Create virtual USB devices at your PC -Redirect all USB stream to remote computer

• License: Commercial
• Language: English
• Release: 2004-04-02
• Size: 576 Kb
• Cost: 49.00 $

Multicom is appointed for emulation of one, two or more (up to 200) serial streams. Hardware devices are not necessary. This product is based on Windows XP DDK and doesn't require using devices of other manufacturers. The whole product is created with the help of Microsoft tooling.

• License: Commercial
• Language: English
• Release: 2004-04-02
• Size: 447 Kb
• Cost: 19.00 $

Virtual Serial Port ActiveX CE is a powerful ActiveX Control for Embedded platforms that allows your software to create custom additional virtual serial ports in Windows CE system and fully control them from within your own program. Virtual serial ports you will create look and work absolutely like real serial ports for other Windows CE applications. VSP ActiveX Control CE features unique set of algorithms for system and port events notification.

• License: Shareware
• Language: English
• Release: 2005-05-04
• Size: 829 Kb
• Cost: 99.95 $

Eltima Virtual Serial Port Driver 6.0 enables you to create any number of pure virtual serial ports in your system connected into pairs via virtual null-modem cable without using any real serial ports. Virtual Serial Ports appear to operating system or any Windows application as "standard" hardware serial ports. This is helpful for serial software and GPS software developers, telecommunication and data transmission specialists.

• License: Shareware
• Language: English
• Release: 2007-05-22
• Size: 2 Mb
• Cost: 99.95 $

The developers of the given facilities very often face with such a necessity. For instance, during the debugging in a remote machine or when different people with the help of different machines (which are nevertheless connected to one machine) maintain the same facilities. AVSD.IP is designed especially for the solving of these problems. The use of our product gives you the possibility to give the remote access to serial port via TCP/IP.

• License: Commercial
• Language: English
• Release: 2002-09-17
• Size: 576 Kb
• Cost: 189.90 $

Serial communication component Visual dBASE library for serial port communications. Controls multiple ports simultaneously; is fully thread safe, port re-entrant. Includes 34 functions plus modem control, ANSI emulation, ASCII/XMODEM/YMODEM protocols. Supports virtual ports (usb to serial, bluetooth serial); hardware/software flow control, line control. Works with all versions of dBASE. Use with any language that can call the Windows API.

• License: Shareware
• Language: English
• Release: 2006-04-06
• Size: 339 Kb
• Cost: 105.00 $

Serial communication component Visual FoxPro library for serial port communications. Controls multiple ports simultaneously; is fully thread safe, port re-entrant. Includes 34 functions plus modem control, ANSI emulation, ASCII/XMODEM/YMODEM protocols. Supports virtual ports (usb to serial, bluetooth serial); hardware/software flow control, line control. Works with all versions of Visual FoxPro (VFP). Fully functional evaluation version.

• License: Shareware
• Language: English
• Release: 2006-03-30
• Size: 331 Kb
• Cost: 105.00 $

Serial Port Mapper allows you to map any serial ports to any other serial ports. For example you install additional serial port expansion card to computer as COM7 serial port but your favorite software can work with COM1...COM4 ports only. To resolve this problem you can use Serial Port Mapper to map new COM7 port either to COM1 or to COM2...COM4. Now your software can open COM1 port (or COM2...COM4) but actually work with new COM7 port.

• License: Shareware
• Language: English
• Release: 2005-06-22
• Size: 609 Kb
• Cost: 99.95 $

Serial Port Redirector is used to connect a serial application to a remote TCP socket. This allows you to utilize modern hardware COM servers without changing your software or exchange data between a TCP/IP application and an old-fashioned program that can only connect to a serial port. This is done by creating virtual COM ports. Virtual COM ports accept connections from serial applications and redirect the data to a specified IP address/port.

• License: Shareware
• Language: English
• Release: 2006-11-02
• Size: 847 Kb
• Cost: 99.95 $

Serial Port ActiveX Control is a powerful component that lets developers quickly and effectively work with serial port. Use Serial Port component to easily communicate with external devices on RS232 connection, such as modems, bar code readers, PBX and so on. Serial Port introduces several extremely useful properties for detailed setting of serial port, numerous methods to write and read from port and events to control serial port state changes.

• License: Shareware
• Language: English
• Release: 2004-06-08
• Size: 1001 Kb
• Cost: 61.95 $

Share Serial Ports is an advanced utility for sharing real serial ports between multiple applications so that all applications will receive same data from real serial port simultaneously. It is achieved by creating virtual serial ports, exact copies of real ones. All virtual ports can send data to real serial port. You will be able to set port permissions to read, write or change control lines state for every application separately.

• License: Shareware
• Language: English
• Release: 2004-04-05
• Size: 1 Mb
• Cost: 111.95 $

To monitor (bi-directional) Serial communication RS-232 between two devices without physical cable, you can use the freeware Bill Serial Monitor. This freeware enable you to view, log, test and analyse the activity of the serial RS-232 port. If you want to monitor the serial protocol of two different serial devices you can use our Protocol Analyser function. DSR, CTS, DTR and RTS can also be controlled

• License: Freeware
• Language: English
• Release: 2005-08-11
• Size: 3 Mb
• Cost: Free

This is software-based solution that lets you share up to 255 serial port devices over TCP/IP network. So, any serial port device connected to COM port could be accessed from anywhere as if it is attached to local PC. It provides the ability to create three different types of connection: Port-to-port, Port-to-TCP client and Port-to-TCP server. Serial to Ethernet Connector uses virtual port technology which emulates real serial ports.

• License: Shareware
• Language: English
• Release: 2005-12-07
• Size: 3 Mb
• Cost: 99.95 $

Serial communication component VB (VB.NET) library for serial port communications. Controls multiple ports simultaneously; is fully thread safe, port re-entrant. Includes 34 functions plus modem control, ANSI emulation, ASCII/XMODEM/YMODEM protocols. Supports virtual ports (usb to serial, bluetooth serial); hardware/software flow control, line control. Works with all versions of Visual Basic and VB .NET, VBA and PowerBuilder.

• License: Shareware
• Language: English
• Release: 2006-02-21
• Size: 411 Kb
• Cost: 105.00 $

Eltima Virtual Serial Port ActiveX Control is a powerful tool for professional developers that allows your application to create custom additional virtual serial port in system and fully control it. Created virtual serial port looks like real serial port for other Windows applications. From your application you can control data sent to virtual serial port by other applications and respond to them by sending own data to virtual serial port.

• License: Shareware
• Language: English
• Release: 2008-03-04
• Size: 1 Mb
• Cost: 179.95 $